Home >
Shenzhen Pray-med Technology Co.,Ltd>
6850645 Draeger Oxygen Sensor O2 Cell / Oxygen Battery Plastic Metal Material
Shenzhen Pray-med Technology Co.,Ltd
Shenzhen pray-med technology co.,ltd is a professional manufacturer of medical accessories for patient monitor nearly 10 years
Biocompatiblity test,clinic test report
- Annual Revenue 1000000-5000000 USD
- Year Established 2010
Share us via
Certification
See All
Copyright 2023 ucbis.com All Rights Reserved.
6850645 Draeger Oxygen Sensor O2 Cell / Oxygen Battery Plastic Metal Material
Drager 6850645 medical oxygen sensor o2 cell / oxygen battery
Technical Specifications
| Measuring range | 0-100% | |||
| Accuracy | +/-2% of full scale | |||
| Signal output | 10-14mV | |||
| Linearity | +/-2% of full scale | |||
| Response T90 | 13 sec | |||
| Temp Coefficient | compensated | |||
| Shelf Life | 6 months | |||
| Humidity Non-condensing | 0-99% RH | |||
| Operating Temp | 0 to 40℃ | |||
| Recommended storage | 0 to 25℃ | |||
| Expected Life | 60 months | |||
| Warrangty | 18 months | |||
| Electrical Connector | gold plated slip rings |
|||
| Measurement Range: | 0-100 % oxygen |
| Accuracy and Repeatability: | < 1 % vol. O2when calibrated at 100 % O2 |
| Zero Ofset: | < 0.5 % vol. O2in 100% N2, applied 5 minutes |
| Linearity Error: | < 3 % relative |
| Cross Interference: | < 0.5 % vol. O2response to: |
| 10 % CO2balance N2 | |
| 80% N2O balance N2 | |
| 7.5% Halothane balance N2 | |
| 7.5 % Isofurane balance N2 | |
| 7.5 % Enfurane balance N2 | |
| 9% Sevofurane balance N2 | |
| 20% Desfurane balance N2 | |
| Infuence of Humidity: | - 0.03 % rel. per % RH at 25C |
| Infuence of Pressure: | proportional to change in oxygen partial |
| pressure | |
| Infuence of Mechanical Shock: | < 1% relative after a fall from 1m |
| Operating Temperature: | 0 to 50C |
| Temperature Compensation: | built-in NTC compensation (see below) |
| Efect of Temperature | between +5 C and +25 C: 3 % relative error |
| Compensation (steady state): | between 0 C and +50 C: 8 % relative error |
| Operating Humidity: | 0-99 % RH non-condensing |
| Long Term Output Drift: | < 1 % vol oxygen per month |
| typically < - 15 % relative over lifetime | |
| Storage Temperature: | -20 to +50 C |
| Recommended Storage: | +5 to +15 C |
| Recommended Load: | 10 kOhms |
| Warm-Up Time: | < 30 minutes, after replacement of sensor |
| Weight: | approximately 28 grams |
| approximately 43 grams E61912 series |
